Category Archives: Made by Mitty

my wedding dress

Before I was even engaged, I knew that I’d be making my own wedding dress. It wouldn’t really feel like my wedding if I didn’t. I have a lot of pictures to share, and a fair bit of explaining, so lets get to it!

I started as most brides do, by trawling through the Wedding category on Pinterest. This is a deep, dark, rabbit hole, and if you’re not careful, you will fall down it and never come out! I quickly found elements that I loved, a soft, layered skirt; tiny cap sleeves; lace!

Then, I saw this dress… SWOON! That soft blush-pink colour was so lovely and feminine, I knew I needed it.

11052016_03

I also tried on a few RTW dresses, just to get a feel of how big I wanted the skirt. I knew there wasn’t any danger of falling in love with a RTW dress and wanting to buy it. By this stage I was 80% sure of what I wanted, and knew I’d never find it in a shop.

I sketched out a few different styles, playing with the bodice and shoulder strap design. The skirt stayed the same with each new sketch.

11052016_04

11052016_05

Finally, I came to a decision. I would be making a boned, strapless under-bodice, a lace-bodice overlay with small cap-sleeves, and an open keyhole back. The bottom of the dress would consist of an underskirt with a small sweep, and a layered, full circle over-skirt.

With my design nutted out, I called on the help of the most talented pattern maker I know. Monica is an absolute magic-making master, and I honestly could not have created such an amazing dress without her help and guidance. Thank you, Mon, for everything you’ve taught me!

Photo by James Day

Photo by James Day – Thanks Monie!

We started with the simple bits, the under-bodice, lace bodice, and underskirt. Then, we tackled the over-skirt. I really wanted something where the layers weren’t too structured, I wanted them to flow and move in unexpected ways. We worked all day on the pattern, and basically came out with something that looked like this:

I know this looks a bit like an egg, but stick with me...

I know this looks a bit like an egg, but stick with me…

We started with a basic, full length circle skirt pattern (which ended up being layer four). The next three layers were created in the same way, where layer three dipped down, I made the same point of layer two higher. A high point on layer two, made the same point on layer one lower. This would give the hem lines of each layer a really lovely flow.

With the pattern (and a series of toiles) made, it was time to go shopping for the final fabric! I bought some beautiful white, corded lace from the same shop I got the bridesmaids dress fabric from. The beautiful ivory silk (for the under-bodice and underskirt), and the white silk organza came from Elsegood Fabrics in Alexandria. The final stop was Tesutti Fabrics in Surry Hills for the dusty, blush silk organza.

With everything purchased, it was time to start cutting! I have never felt more nervous about the first snip! I cut layer one and three from the dusty pink organza, and layer two and four from the ivory organza. I also cut organza bodice pieces to layer over the ivory silk, so the overall look of the dress had a consistent colour.

I managed to sew the entire dress in seven days. I took everything to my parents house over the Christmas break and worked on the dress from 8.30am until 5.00pm, every day. I kept track of what I did each day:

Day One – Cut out base cloth for under-skirt and bodice Apply fusing to bodice Cut out tear-a-way for bodice necklines

Day Two – Sew under-skirt using French Seams Run overlocker around unfinished edges of under-skirt Sew lining bodice (including channelling) Insert boning Pin outer-skirt (pink & ivory) patterns to fabric

Day Three – Cut out all pieces of over-skirt Test French Seams on the organza Cut out organza for bodice Sew all seams of the over-skirt layers

Day Four – Sew the horsehair braid on all layers of the over-skirt

Day Five – Sew over-skirt layers together at the waistline Seam outer bodice Cut out lace bodice

Day Six – Sew underbodice, outer bodice and lace bodice together on front panel Construct the rest of the lace bodice using French seams

Day Seven – Sew all layers of skirt to bodice, leaving the lace and under-bodice free Insert zipper Hand stitch underbodice to waistline

All I had left to do now, was hem the under-skirt (I forgot to take my shoes!) and bead the lace bodice. I spent the nights on the lounge, slowly adding Swarovski beads, tiny seed beads, and chalk white sequins to the lace. It took me a few weeks, but was well worth the effort; it looked spectacular!

11052016

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

Photo by James Day

I couldn’t be happier with my dress, it was so comfortable, and I just loved how the sun light picked up the subtle colour differences in the skirt.

I’d also like to say a massive thank you to our photographer, James Day. He was just wonderful on the day, melting into the background to get some of these beautiful shots, but was also very personable and entertaining with our guests. I’m so glad we asked him to shoot our day, I’ll be looking back on these gorgeous pictures for the rest of my life, with a smile on my face.

Well, that’s the last of my wedding-related posts, I hope you’ve enjoyed them as much as I have!

Mitty x

white & gold bra

10022016_01

I’ve been bra sewing again! I have a few other sewing projects that I really need to dedicate my time to, but I just couldn’t help myself!

I wanted to play around with the cup style, so I’ve added in a power-band, and I moved the cross seam up a little bit.

10022016_02

I cut the majority of the cup from a beautiful white and gold lace from Boobytraps. The power band is a medium weigh, white lycra.

10022016_03

I wanted a much lower cut style than my previous bra, so I took about 4cm out of the cups and bridge. Only after I did this, I realized that I didn’t have any under-wires to fit the lower style. I could have waited, and bought some, but I was being rather impatient, so I harvested a pair of wires from an old bra. I checked to make sure they weren’t bent out of shape, then I drew around them onto a piece of paper for future wire-buying.

10022016_07

To show how much I lowered the bridge, I put the white bra on top of the pink bra. It’s quite a dramatic difference!

10022016_04

The back is exactly the same design as my pink bra, and cut from the white lycra.

10022016_08

I lined the entire bra (except the back wing) with bra tule. I love how it encases all of the seams, it gives a very neat finish.

I wore this bra yesterday, so I could report on the comfort level. OMG it was SO ITCHY! How is that possible? It’s fully lines with the softest tule and it doesn’t have any raw seams!? The only thing I can think of, is that I’m rather sensitive, having worn padded bras every day for the last 15 years. Has this been a problem for anyone else? I hope to get used to it over time, because I’d hate to never wear this bra again, it’s so beautiful!

Let me know if you’ve experienced anything like this, and if you have any recommendation to increase the comfort.

Mitty x

boobytraps workshop

For all the time I’ve been sewing my own clothing, never did it cross my mind that I could make my own bra. When it finally did cross my mind, there were a few things holding me back.

  1. Far too complicated, with under-wires etc
  2. Too fiddly, it looks like so many different, small bits..
  3. I don’t even know where to start with sewing elastic!

I did what any normal person would do, I started researching. What I found was much different to what I expected. There is an entire online bra-making community! Everyone is so lovely and informative! I’ll link some of my favourite blogs at the end of this post.

During my research, I started looking for suppliers of bra bits. There are heaps of online stores, but what I really wanted to find was somewhere I could go and actually look and touch the laces for myself. That’s when I found Boobytraps.

MBM_20012016 09

Boobytraps are primarily an online store, however they do open to the public on Thursdays and some Saturdays. They have an amazing range of laces, elastics, and patterns. I was so excited to see that they also hold bra-making workshops! I signed up straight away!

I chose to make an under-wired, soft cup bra. All of my RTW (ready to wear) bras are the padded, molded cup variety, I was really interested to see if I’d find a soft cup comfortable.

MBM_20012016 01

This is my finished bra! Was it difficult? Not really. Was it fiddly? Hm, a little bit, but not enough to turn me off making more! Is it comfortable? Absolutely!

MBM_20012016 04

Under the guidance of our teacher, Lynn, we learnt the importance of lining a bra (none of my RTW bra’s are lined..), how to fully encase the seams to eliminate the itch-factor, how to insert under-wire casing, how to sew elastic properly… the list goes on! The workshop was totally worth the cost for the tips I learnt alone, not to mention the fact I walked away with my very first me-made bra!

 I decided to go with a light coloured kit, so I could really see what I was doing. The kit came with everything I needed to make the bra, including these gorgeous detailed elastic straps! So pretty!

I highly recommend these classes, but you do need to have a bit of stretch-sewing experience. I also took along my own sewing machine, stretch needles, silk pins, scissors and measuring tape.

Now to my favourite bra & lingerie blogs!

  • Visit Maddy at Madalynne for some truly ethereal, lovely lingerie inspiration/tutorials.
  • Erin at The Emerald Studio is incredibly talented! She even delves into the finer details of bra making, which I can’t get enough of.
  • Amy from Cloth Habit is the designer behind the Watson Bra pattern, which has a cult following. It’s a gorgeous little pattern, which you can purchase online.

I think I’m addicted to bra making. I’m OK with that!

Mitty x

the gift of fabric

I love thoughtful gifts, both giving and receiving them. My gorgeous friend, Nicole, gave me a very thoughtful Christmas gift, a lovely piece of fabric, and I instantly knew what I was going to make from it.

MBM_13012016_01

This is a fairly thick cotton, and I’m 100% certain that it was a curtain at some stage. Seeing as I wasn’t sure where it came from, or how colour-fast the print was, I popped it in the wash. It came out looking just as lovely as when it went in! I’m so glad the colours didn’t run.

MBM_13012016_02

The print is amazing, it’s so retro, and I just love it. I wanted to get one of those big flowers on the front of the dress, so that took priority while placing my pattern pieces.

MBM_13012016_03

I’m using a self-drafted pattern, which is a basic shift style dress, with short sleeves, and minimal shaping (being bust darts). I’m also using a facing for a clean neck line.

MBM_13012016_11

The dress came together very easily, finished in one afternoon! I don’t mind the slightly doubled-up pattern on the back, it was a necessity for getting that large flower on the front.

I’m very pleased with my new dress, and can guarantee that it will get a lot of wear. I’ll even be able to get away with it in cooler months, with tights and boots!

Thanks to Nicole, for such a thoughtful gift!

Mitty x

an update: 12.01.2016

Wow.. My last post was in May 2015. So much has been happening since then, and I wanted to give a quick update as to why I haven’t been posting.

The Mady by Mitty launch happened in March 2015, and I had all intentions of devoting my time to creating and sewing, and all things Mitty! However, Reagan asked me to marry him on the same night! Unfortunately, Mitty took a back seat to wedding preparations.

Our wedding will be happening in March this year (2016)! I’m at a point now where I feel that I can get back into blogging. Our wedding is a major DIY event, and I’ve got lots of related posts ready to go.

As well as wedding posts, I’ll be blogging about all the other things that I make along the way.

2016 will be a very big year for me, and I’m really looking forward to documenting it! I hope you enjoy as much as I do!

Mitty x

Made by Mitty has launched!

Hey! Welcome to the Made by Mitty blog! Over the next few posts, I’ll be telling you all about myself, and where this little business came from. For now, I’d like to share with you some photos from our Launch Party (which was SO much fun!), and details on a few of the things you can find in our Etsy store.

Myself and Reagan, ready for a big night!

Myself and Reagan, ready for our big night!

We had such a great turn out, the 2 hours just flew by! Nothing could have prepared us for all the support we’ve received, and we’d like to thank everyone who came along.

Now to the products! Here I’m showcasing our cushion covers, which come in a range of patterns and sizes. Of course, we do make other things, like skirts, cami’s, silk ties, silk bow ties, and much more!

Cushion cover in Mitty Diamonds

Cushion cover – Mitty Diamonds

Cushion cover - Seigaiha in Maroon

Cushion cover – Seigaiha in Maroon

Cushion cover - World Map

Cushion cover – World Map

Cushion cover - Black & cream arrow fletching, Lime Green Cocktails, and Lime & Fletching

Cushion cover – Black & cream arrow fletching, Lime Green Cocktails, and Lime & Fletching

If you’d like to rummage through our virtual racks, then click here to visit the Etsy store, or click the Etsy store button in the main menu.

Stay tuned for more Mitty goodness soon!